407 hl-relays 15a (1c), 10 a (2c) space saving power relay testing mm inch 27.2 1.071 35.4 1.394 20.8 .819 features ? high switching capacity in a compact size 1 form c (15 a 125 v ac), 2 form c (10 a 250 v ac) ? rugged construction for tough applications ? long life mechanical: min. 10 8 operations (dc), min. 5 10 7 operations (ac) electrical: min. 5 10 5 operations specifications contacts remarks * speci?cations will vary with foreign standards certi?cation ratings. * 1 measurement at same location as "initial breakdown voltage" section * 2 detection current: 10 ma * 3 excluding contact bounce time * 4 half-wave pulse of sine wave: 11ms; detection time: 10 m s * 5 half-wave pulse of sine wave: 6ms * 6 detection time: 10 m s * 7 refer to 5. conditions for operation, transport and storage mentioned in ambient environment (page 61). characteristics (at 25 c 77 f , 50% relative humidity) arrangement 1 form c 2 form c initial contact resistance, max. (by voltage drop 6 v dc 1 a) 50 m w contact material silver alloy rating (resistive) nominal switching capacity 15 a 125 v ac, 10 a 250 v ac 10 a 250 v ac max. switching power ac: 2,500 va dc: 90 w ac: 2,500 va dc: 90 w max. switching voltage 250 v ac 30 v dc 250 v ac 30 v dc max. switching current 15 a 10 a expected life mechanical (at 180 cpm) 5 10 7 (ac), 10 6 (dc) electrical (resistive) 15 a 125 v ac 5 10 5 10 a 250 v ac 5 10 5 5 10 5 3 a 30 v dc 5 10 5 5 10 5 max. operating speed 20 cpm initial insulation resistance* 1 min. 100 m w (at 500 v dc) initial breakdown voltage* 2 between contact sets 1,500 vrms for 1 min. between open contacts 1,000 vrms for 1 min. between contacts and coil 2,000 vrms for 1 min. operate time (at nominal voltage) approx. 10 ms (dc type) approx. 10 ms (ac type) release time* 3 (without diode) (at nominal voltage) approx. 5 ms (dc type) approx. 10 ms (ac type) temperature rise, max. (at nominal voltage) max. 80 c shock resistance functional* 4 min. 196 m/s 2 {20 g} destructive* 5 min. 980 m/s 2 {100 g} vibration resistance functional* 6 10 to 55 hz at double amplitude of 1 mm destructive 10 to 55 hz at double amplitude of 2 mm conditions for opera- tion, transport and stor- age* 7 (not freezing and condensing at low tem- perature) ambient temperature C50 c to +70 c C58 f to +158 f humidity 5 to 85% r.h. unit weight approx. 35 g 1.25 oz typical applications power station control equipment, refriger- ators, building control equipment, of?ce machines, and medical equipment. ordering information 2h hl ex. contact arrangement ac240v terminal arrangement coil voltage note: standard packing carton: 20 pcs., case: 200 pcs. ul/csa approved type is standard. 1: 1 form c 2: 2 form c h: plug-in hp: pc board htm: top mounting l: light emitting diode wired, plug-in pl: light emitting diode wired, pc board ac 6, 12, 24, 48, 120, 240 v dc 6, 12, 24, 48, 110 v
hl 408 coil data (at 20 c 68 f ) dc coils ac coils (50/60 hz), at 60 hz coil voltage, v dc pick-up voltage, v dc (max.) drop-out voltage, v dc (min.) max. allowable voltage, v dc coil resistance, w ( 10%) nominal coil current, ma operating power, w nominal minimum 6 4.8 0.6 6.6 40 150 0.90 0.58 12 9.6 1.2 13.2 160 75 24 19.2 2.4 26.4 650 37 48 38.4 4.8 52.8 2,600 18.5 110 88.0 11.0 121.0 10,000 10 1.0 0.64 coil voltage, v dc pick-up voltage, v ac (max.) drop-out voltage, v ac (min.) max. allowable voltage, v ac nominal coil current, ma operating power, va nominal minimum 6 4.8 1.8 6.6 200 1.20 0.77 12 9.6 3.6 13.2 100 24 19.2 7.2 26.4 50 48 38.4 14.4 52.8 25 110/120 96 36 132 10.9/11.9 220/240 176.0 66 242.0 6.0/6.5 notes: 1. the range of coil current is 15% for ac (60 hz), 10% for dc, at 20 c. 2. the relay may be used in the range of 80% to 110% of the nominal coil voltage. however, it is recommended that the relay be used at 85% to 110% nominal voltage to take temporary voltage variations into consid- eration. 3. each coil resistance of dc types is the measured value at a coil tem- perature of 20 c. please allow a compensation of 0.4% resistance for each coil temperature change of 1 c. 4. all ac 240 v types are rated for double coil voltages, both ac 220 v and ac 240 v. 5. for use with 220 or 240 v dc, connect a resistor, as suggested below, in series with the 110 v dc relay. voltage 1 form c, 2 form c 220 v dc 240 v dc 11 kw (5 w) 13 kw (5 w) dimensions mm inch plug-in pc board* 1 top mounting hl1 (1 form c) 1.2 .047 accepts faston #187 schematic 2 6 8 7 3 20.8 .819 27.2 1.071 6.35 .250 10 .394 3.95 .156 4.6 .181 6 .236 7.15 .281 35.4 1.394 14.2 .559 ac type dc type 8 7 ( ~ ) ( ~ ) 3 2 6 8 7 ( - ) ( + ) 3 2 6 20.8 .819 27.2 1.071 35.4 1.394 3 3 2 2 6 6 8 7 schematic 1.2 .047 0.5 .020 1.5 .059 5 .197 3.5 .138 1.5 .059 78 ac type dc type 8 7 ( ~ ) ( ~ ) 3 2 6 8 7 ( - ) ( + ) 3 2 6 20.6 .811 43 1.693 3 3 2 6 8 7 2 6 8 7 schematic accepts faston #187 mounting dimension 2-3.2 to 3.5 dia 2 .079 1.2 .047 2-.126 to .138 dia 6.35 .250 3.6 .142 35.4 1.354 37.6 1.480 37.6 1.480
hl 409 tolerance: 0.5 .020 hl2 (2 form c) plug-in pc board* 1 top mounting 20.8 .819 35.4 1.394 27.2 1.071 1.2 .047 6.35 .250 10 .394 14.2 .559 3.7 .146 4.7 .185 6 .236 7.3 .287 1 3 5 7 accepts faston #187 8 2 4 6 schematic ac type dc type 8 7 ( ~ ) ( ~ ) 3 2 6 8 7 ( - ) ( + ) 3 2 6 27.2 1.071 1.2 .047 0.5 .020 1.5 .059 20.8 .819 35.4 1.394 3.5 .138 1.5 .059 1 78 1 3 5 78 2 4 6 3 5 2 4 6 schematic 5 .197 ac type dc type 8 7 ( ~ ) ( ~ ) 3 2 6 8 7 ( - ) ( + ) 3 2 6 20.6 .811 37.6 1.480 37.6 1.480 2 .079 43 1.693 1.2 .047 1 1 2 4 6 5 3 8 7 3 5 2 4 6 78 schematic accepts faston #187 mounting dimension 2-3.2 to 3.5 dia. 2-.126 to .138 dia. 6.35 .250 3.6 .142 34.4 1.354 * 1 pc board pattern copper-side view (hl1) (hl2) 5-2 dia. 5-.079 dia. 7.15 .281 17.75 .700 8.5 .335 14.2 .559 4.6 .181 6 .236 4 .158 4 .158 4 .158 10 .394 1.25 .049 1.25 .049 1.25 .049 r3 r2 8-2 dia. 8-.079 dia. 7.3 .287 18 .709 13.3 .524 14.2 .559 2 .079 10 .394 2 .079 r2 r2 tolerance: 0.1 .004 accessories 1.plug-in terminal socket hl1-ss-k (with hold-down clip) 25.5 1.004 18.7 .736 11.2 .441 29.4 1.157 accepts faston #187 0.23 .009 4.75 .187 panel cutout 25.8 1.016 21.6 .850 hl2-ss-k (with hold-down clip) 25.5 1.004 18.7 .736 11.2 .441 29.4 1.157 accepts faston #187 0.23 .009 4.75 .187 panel cutout 25.8 1.016 21.6 .850 plug-in terminal socket mount simply insert socket into panel hole and push down as indicated to lock socket in place. panel cutout for tandem mounting tolerance: 0.1 .004 1.0 to 2.0 .039 to .079 panel thickness 25.8 1.016 8.9 .350 25.8 1.016 21.6 .850 21.6 .850 5.9 .232 minimum separation distance mm inch mm inch
hl 410 3. screw terminal socket for din rail assembly hl2-sfd-k (with hold-down clip) m3.5 terminal screw 26 0.6 1.024 .024 28.6 0.6 1.126 .024 30 0.6 1.181 .024 8 .315 67 1 2.638 .039 21.1 0.6 .831 .024 10 0.2 .394 .008 4.65 0.2 .183 .008 1.35 0.1 .053 .004 9.35 0.2 .368 .008 8.1 0.2 .319 .008 schematic 21 43 65 87 layout for tandem mounting tolerance: 0.1 .004 8 .315 26 1.024 26 1.024 30 1.181 30 1.181 4 .158 33.5 1.319 67 2.638 minimum separation in tandem mounting 2-m3.5 screw holes or 2-4.2 0.1 dia. (remark) max. continuous current of all hl sockets is 10 a. mm inch for cautions for use, see relay technical information (page 48 to 76). 2. pc board terminal socket hl1-ps-k 21.2 .835 16.2 .638 11.2 .441 0.23 .009 2.0 .079 1.0 .039 29.4 1.157 pc board pattern 15.3 .602 10 .394 5-2.4 dia. 5-.094 dia. 17.45 .687 12.75 .502 6.75 .266 hl2-ps-k 21.2 .835 16.2 .638 11.2 .441 0.23 .009 2.0 .079 1.0 .039 29.4 1.157 pc board pattern 15.3 .602 10 .394 8-2.4 dia. 8-.094 dia. 17.45 .687 12.75 .502 6.75 .266 layout for tandem mounting (2 form c) tolerance: 0.1 .004 10 .394 23.2 .913 10 .394 (6.6) (.260) (5.3) (.209) 17.45 .687 17.45 .687 17.25 .679 15.3 .602 7.9 .311 15.3 .602 2.4 dia. .094 dia. 9/1/2000 all rights reserved, ? copyright matsushita electric works, ltd. go to online catalog
|
